Hi Everyone
I am using the ceph-disk command to prepare disks for an OSD.
The command is:
ceph-disk prepare --zap-disk --cluster $CLUSTERNAME --cluster-uuid $CLUSTERUUID
--fs-type xfs /dev/${1}
and this consistently raises the following error on RHEL7.1 and Ceph Hammer viz:
partx: specified range <1:0> does not make sense
partx: /dev/sdb: error adding partition 2
partx: /dev/sdb: error adding partitions 1-2
partx: /dev/sdb: error adding partitions 1-2
I have had similar errors on previous versions of Ceph and RHEL. We have
decided to stick with Hammer/7.1 and I
am interested if anybody has any comment on this.
The error seems to do no harm so is probably cosmetic but on principle at least
I would al least like to know if
I can safely ignore this.
Many thanks.
Regards
Paul Hewlett
Senior Systems Engineer
Velocix, Cambridge
Alcatel-Lucent
t: +44 1223 435893 m: +44 7985327353
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
