Hi,
On 13/04/2015 16:15, HEWLETT, Paul (Paul)** CTR ** wrote:
> Hi Everyone
>
> I am using the ceph-disk command to prepare disks for an OSD.
> The command is:
>
> *ceph-disk prepare --zap-disk --cluster $CLUSTERNAME --cluster-uuid
> $CLUSTERUUID --fs-type xfs /dev/${1}*
>
> and this consistently raises the following error on RHEL7.1 and Ceph Hammer
> viz:
>
> partx: specified range <1:0> does not make sense
> partx: /dev/sdb: error adding partition 2
> partx: /dev/sdb: error adding partitions 1-2
> partx: /dev/sdb: error adding partitions 1-2> > I have had similar errors on previous versions of Ceph and RHEL. We have > decided to stick with Hammer/7.1 and I > am interested if anybody has any comment on this. > > The error seems to do no harm so is probably cosmetic but on principle at > least I would al least like to know if > I can safely ignore this. It is indeed harmless. It was not suppressed to get more information information when and if something goes wrong. I've created http://tracker.ceph.com/issues/11377 to remember that confusion should be fixed. Cheers > > Many thanks. > > Regards > > Paul Hewlett > Senior Systems Engineer > Velocix, Cambridge > Alcatel-Lucent > t: +44 1223 435893 m: +44 7985327353 > > > > > _______________________________________________ > ceph-users mailing list > [email protected] > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > -- Loïc Dachary, Artisan Logiciel Libre
signature.asc
Description: OpenPGP digital signature
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
