> Op 22 juli 2016 om 15:26 schreef Andrei Mikhailovsky <[email protected]>: > > > Hi Henrik, > > Many thanks for your answer. > > What settings in the ceph.conf are you referring to? These: > > mon_initial_members = > mon_host = >
only mon_host is required. > I was under the impression that mon_initial_members are only used when the > cluster is being setup and are not used by the live cluster. Is this the > case? If so, should I simply change the mon_host values? Is this value used > by ceph clients to find ceph monitors? > Keep in mind, any running librados/librbd clients will obtain the new monitormaps live and do not require a restart. You just have to modify they configuration so that when you start them again they start with the proper information. You can change all IPs in your Ceph cluster without the need to restart a client. As long ad the clients can reach both the old and new IPs. Wido > thanks > > Andrei > > > From: "Henrik Korkuc" <[email protected]> > > To: "ceph-users" <[email protected]> > > Sent: Friday, 22 July, 2016 13:04:36 > > Subject: Re: [ceph-users] change of dns names and IP addresses of cluster > > members > > > On 16-07-22 13:33, Andrei Mikhailovsky wrote: > > >> Hello > > >> We are planning to make changes to our IT infrastructure and as a result > >> the > >> fqdn and IPs of the ceph cluster will change. Could someone suggest the > >> best > >> way of dealing with this to make sure we have a minimal ceph downtime? > > > Can old and new network reach each other? If yes, then you can do it without > > cluster downtime. You can change OSDs IP on server by server basis - stop > > OSDs, > > rename host, change IP, start OSDs. They should connect to cluster with new > > IP. > > Rinse and repeat for all. > > > As for mons you'll need to remove mon out of the cluster, then readd with > > new > > name and IP, redistribute configs with new mons. Rinse and repeat. > > > Depending on your use case it is possible that you may have client downtime > > as > > sometimes it is not possible to change client's config without a restart > > (e.g. > > qemu machine config) > > >> Many thanks > > >> Andrei > > >> _______________________________________________ > >> ceph-users mailing list [email protected] > >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > _______________________________________________ > > ceph-users mailing list > > [email protected] > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ > ceph-users mailing list > [email protected] > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
