Same here, is there any ETA to publish CentOS packages?
--- Diego Castro / The CloudFather GetupCloud.com - Eliminamos a Gravidade 2016-12-09 18:59 GMT-03:00 Reed Dier <reed.d...@focusvq.com>: > Assuming you deployed within the last 48 hours, I’m going to bet you are > using v10.2.4 which has an issue that causes high cpu utilization. > > Should see large ramp up in loadav after 15 minutes exactly. > > See mailing list thread here: https://www.mail- > archive.com/ceph-users@lists.ceph.com/msg34390.html > > Reed > > > On Dec 9, 2016, at 3:25 PM, lewis.geo...@innoscale.net wrote: > > Hello, > I am testing out a new node setup for us and I have configured a node in a > single node cluster. It has 24 OSDs. Everything looked okay during the > initial build and I was able to run the 'rados bench' on it just fine. > However, if I just let the cluster sit and run for a few minutes without > anything happening, the load starts to go up quickly. Each OSD device ends > up using 130% CPU, with the load on the box hitting 550.00. No operations > are going on, nothing shows up in the logs as happening or wrong. If I > restart the OSD processes, the load stays down for a few minutes(almost at > nothing) and then just jumps back up again. > > Any idea what could cause this or a direction I can look to check it? > > Have a good day, > > Lewis George > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
