Hi All, Any further suggestions, should i just ignore the error "Failed to load ceph-mgr modules: telemetry" or is this my route cause for no realtime I/O readings in the Dashboard?
Thanks On Fri, Feb 8, 2019 at 3:59 PM Ashley Merrick <singap...@amerrick.co.uk> wrote: > Message went away, but obviously still don't get the stats showing in the > dashboard (I am guessing this isn't a known bug currently?) and that they > should be working. > Everything work's fine apart from the dashboard does not show the live I/O > stats. > > Nothing is mentioned in mgr lags at the default log level, just the > message that showed under Cluster Logs. > > ,Ashley > > On Fri, Feb 8, 2019 at 3:57 PM Wido den Hollander <w...@42on.com> wrote: > >> >> >> On 2/8/19 8:13 AM, Ashley Merrick wrote: >> > I have had issues on a mimic cluster (latest release) where the >> > dashboard does not display any read or write ops under the pool's >> > section on the main dashboard page. >> > >> > I have just noticed during restarting the mgr service the following >> > shows under "Cluster Logs", nothing else just the following : "Failed to >> > load ceph-mgr modules: telemetry" >> > >> > Would this be causing the issue, if so is there anything I can do to >> > find the issue? >> > >> >> Like you already did, the Mgr logs. Did the message go away or did you >> need to disable the module? >> >> Wido >> >> > I have looked through the mgr log's but nothing that matches the time >> > stamp shown in the Cluster Logs under the dashboard home page. >> > >> > _______________________________________________ >> > ceph-users mailing list >> > ceph-users@lists.ceph.com >> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > >> >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
