On 10/02/2014 07:07 PM, Dave Taht wrote:
I beleive that on the WNDR3800, it's able to work up to about 50Mb with the
existing configurations. A faster CPU would do better, a slower one worse.
Actually it appears that cache is very important on fixing inbound rate shaping.
The octeon in the edgerouter lite peaks out at above 60mbits also, but the
bigger, fatter pro product actually manages quite a bit better (with increasing
inaccuracy however). See below...
Ugh. Got any hard numbers on the top speed of the edgerouter with shaping?
At work we recently upgraded our link from 60/10 to 100/15 and the WNDR
I have running the show can no longer keep up. I've been looking for a
replacement and the edgerouter lite was looking like a possibility.
I tried to use a TPLink AC1750 thinking that a newer setup with a faster
cpu might be able to keep up. If I don't have shaping enabled it can do
200+ Mbit but with shaping it drops considerably. It's still faster
than the WNDR but seems to max out at about 85 Mbit.
--
Richard A. Smith <[email protected]>
Former One Laptop per Child
_______________________________________________
Cerowrt-devel mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/cerowrt-devel
