Hi Richard,
On Oct 23, 2015, at 18:43 , Richard Smith <[email protected]> wrote:
> On 10/23/2015 12:13 PM, Dave Taht wrote:
>> you are most likely applying the qdisc to the wrong ethernet device or
>> ethernet vlan.
>
> In the cerowrt case it was applied to ge00. If that's not the correct device
> then which one should it be?
That is the “WAN” port and hence the correct one, note you can set up
sqm on non-wan ports as well (actually you can set it up on multiple ports
concurrently, but that seems more relevant after it works correctly on one port
first). In cease you ever set it up on a LAN port, plea note that
download/ingress and upload/egress in the GUI are from the router perspective,
or aligned with the view from machines on the internal network if sqm is set up
on the wan port, if sqm is activated on a lan port the meaning go ingress and
egress reverse from the user perspective. Not that this matters in your case as
you set symmetric shaper rates…
Best Regards
Sebastian
>
> --
> Richard A. Smith
> _______________________________________________
> Cerowrt-devel mailing list
> [email protected]
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
_______________________________________________
Cerowrt-devel mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/cerowrt-devel
