Not knowing what connections you have, I have set mine up as follows... I have a receiver, with DVD, VCR, PSX2 (in VCR2 connection) and TV all connected to it. The TV has two sets of AV connectors. AV1 has in and out. I connect the out cables here to the TV connectors on the Receiver. I then take the Monitor connector on the receiver to AV2 In on the TV.
This means that I can a) switch TV on without anything else and watch, or b) watch anything (inc PS2) using the receiver, and the surround sound hooked up to that. I rarely do a). I tend to just switch on the receiver and use that for all sound. We've also got a spare set of PS2 leads in the bedroom so we can hook the Video connector of the PS2 to a small portable, and the Audio to our stereo and watch DVD's in bed!! :^) Don't know if this helps any... hope it gives you an idea or two, but depends on the connections on your receiver/tv. N "Haggerty, Michael A." wrote: > > Oh, yes, I see what you mean. When I read your post originally, I got the > impression you wanted to know how to set up your Playstation to output sound > in stereo. > > I just run my PS2 and VCR into the TV and then go from the TV to the stereo > for sound. I have a Sony 200 watt head and the sound is terrific. The only > thing to complain about is going from VCR to PS2: the dynamics of the sound > change quite a bit. Sometimes I forget to turn the stereo down before doing > switching and get an audio shock. > > Mike > > -----Original Message----- > From: Raymond Camden [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, February 13, 2002 1:30 PM > To: CF-Community > Subject: RE: PS2/Stereo > > Well I don't have any cables from the PS2 to the receiver. The settings > you talk about would be changing Stero to Mono. > > -rc > > > -----Original Message----- > > From: Haggerty, Michael A. [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, February 13, 2002 1:00 PM > > To: CF-Community > > Subject: RE: PS2/Stereo > > > > > > Did you use the setup screens in the PS2 to configure it for stereo? > > > > -----Original Message----- > > From: Raymond Camden [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, February 13, 2002 12:31 PM > > To: CF-Community > > Subject: PS2/Stereo > > > > > > I currently have my PS2 going into the SVideo connection into > > my TV. Any > > ideas on how to get stereo sound? My TV isn't hooked up to > > the reciever > > since the DVD/VCR/Cable Box have connections already. > > > > My TV has an output - would it better to remove the DVD/VCR/Cable to > > Receiver connections and just direct the TV output to the > > receiver? (Or > > maybe keep DVD, but do this for VCR or Cable? > > > > -rc > > > > > > ______________________________________________________________________ This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Archives: http://www.mail-archive.com/[email protected]/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
