The P4 is generally best matched with Rambus memory. The PC800 RDRAM gives
3.2GB/s memory transfer. The PC266 gives 2.1GB/s.

With that said, I would still go with the DDR system. The difference in
speed with the Rambus vs. DDR is in Rambus's favor, but the DDR is no
slouch. The difference in price these days is negligible, so that's not
really a factor. And the other components in the system will still
bottleneck much of the difference. It really comes down to ethics vs.
theoretical performance.

Rambus tried to sue the pants off of other memory vendors for using their
proprietary tech. But Rambus was later found to have "stolen" the ideas for
much of the architecture from JEDEC, the orginization that defines industry
standards for memory. They served on the JEDEC commitee and weren't exactly
honest about what patents they had and were working on. They were even sued
by their own board.

So do you go with the best performance, or do you support standards at a
very slight decrease in performance? I build my own systems and I'm
extremely happy with my DDR based i845e system.

As for 1GB vs 512MB, if you don't whimper in terror of the extra $180 then
go ahead and spend the money. The i845e specs support up to 2GB.

Kevin Graeme


______________________________________________________________________
Get the mailserver that powers this list at http://www.coolfusion.com

Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists

Reply via email to