hahah supporting it yes. making it stable no way!!

Dell Tech 1: Did you put that 1 gig REG DDR into the board?
tech 2: Yup
tech1: does it boot?
tech 2: yea but it crashes after you hit the 150th press of the Enter key
because of the flaky ram issues. Should we just put in 2 512's?
tech1: Nah screw'em we'll just blame it on Windows XP. They're too dumb to
know the difference

lol

Bill Wheatley
Senior Database Developer
Macromedia Certified Advanced Coldfusion Developer
EDIETS.COM
954.360.9022 X159
ICQ 417645
----- Original Message -----
From: "Kevin Graeme" <[EMAIL PROTECTED]>
To: "CF-Community" <[EMAIL PROTECTED]>
Sent: Tuesday, September 03, 2002 5:09 PM
Subject: RE: PC memory questions


> Well the prices in my head were from several weeks ago and at that time
the
> difference was as little as $10 with some RDRAM actually cheaper than DDR.
>
> Right now there's about a $15 premium for a 256MB stick and $120 for a
> $512MB stick, so currently the price difference is in favor of DDR again.
>
> Most i845e boards have either 2 or 3 slots. My Dell 4400 has two slots.
You
> are correct that trying to put the maximum ram in can lead to flaky
behavior
> unless you are careful about what slots, registered, ECC, etc. That's why
I
> think it's better to have it configured with the extra from Dell if the
cost
> isn't a huge factor and let them deal with making it stable and supporting
> it.
>
> Kevin Graeme
>
>
> > -----Original Message-----
> > From: Bill Wheatley [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, September 03, 2002 3:42 PM
> > To: CF-Community
> > Subject: Re: PC memory questions
> >
> >
> > bah 162 bucks for RDAM vs 90 bucks for DDR its a big difference for
some.
> > Much less if you go for the 1066MHZ RDAM its 304 for a stick of 512.
> >
> > Yea the board supports upto 2 gigs but does it have 4 ram slots
> > or 3 or just
> > 2?
> > I've seen boards say they can handle a 1 gig registered dimm and only to
> > find its flaky as hell.
> >
> >
> >
> >
> > Bill Wheatley
> > Senior Database Developer
> > Macromedia Certified Advanced Coldfusion Developer
> > EDIETS.COM
> > 954.360.9022 X159
> > ICQ 417645
> > ----- Original Message -----
> > From: "Kevin Graeme" <[EMAIL PROTECTED]>
> > To: "CF-Community" <[EMAIL PROTECTED]>
> > Sent: Tuesday, September 03, 2002 4:24 PM
> > Subject: RE: PC memory questions
> >
> >
> > > The P4 is generally best matched with Rambus memory. The PC800
> > RDRAM gives
> > > 3.2GB/s memory transfer. The PC266 gives 2.1GB/s.
> > >
> > > With that said, I would still go with the DDR system. The difference
in
> > > speed with the Rambus vs. DDR is in Rambus's favor, but the DDR is no
> > > slouch. The difference in price these days is negligible, so that's
not
> > > really a factor. And the other components in the system will still
> > > bottleneck much of the difference. It really comes down to ethics vs.
> > > theoretical performance.
> > >
> > > Rambus tried to sue the pants off of other memory vendors for
> > using their
> > > proprietary tech. But Rambus was later found to have "stolen" the
ideas
> > for
> > > much of the architecture from JEDEC, the orginization that defines
> > industry
> > > standards for memory. They served on the JEDEC commitee and weren't
> > exactly
> > > honest about what patents they had and were working on. They were even
> > sued
> > > by their own board.
> > >
> > > So do you go with the best performance, or do you support standards at
a
> > > very slight decrease in performance? I build my own systems and I'm
> > > extremely happy with my DDR based i845e system.
> > >
> > > As for 1GB vs 512MB, if you don't whimper in terror of the
> > extra $180 then
> > > go ahead and spend the money. The i845e specs support up to 2GB.
> > >
> > > Kevin Graeme
> > >
> > >
> > >
> >
> 
______________________________________________________________________
This list and all House of Fusion resources hosted by CFHosting.com. The place for 
dependable ColdFusion Hosting.

Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists

Reply via email to