Let's be real.
This is for my college-age daughter.

A gig is 2 to 4 times the memory most people get.

This, with an ATA100 hd and fast cpu, will tear through 
her Adobe tasks, MP3 ripping, whatever.

Have no argument with 2 @ 512 sticks filling up the 
slots. If someday she needs more than a gig of RAM, the 
remainder of the box will probably be obsolete too - and 
by then she can replace it herself <grin>.

And I totally agree with Kevin - everything from Dell so 
it's warrantied and supported. Have had very good luck 
with them over 3 systems so far.

-Ben

> Well the prices in my head were from several weeks ago and at that time the
> difference was as little as $10 with some RDRAM actually cheaper than DDR.
> 
> Right now there's about a $15 premium for a 256MB stick and $120 for a
> $512MB stick, so currently the price difference is in favor of DDR again.
> 
> Most i845e boards have either 2 or 3 slots. My Dell 4400 has two slots. You
> are correct that trying to put the maximum ram in can lead to flaky behavior
> unless you are careful about what slots, registered, ECC, etc. That's why I
> think it's better to have it configured with the extra from Dell if the cost
> isn't a huge factor and let them deal with making it stable and supporting
> it.
> 
> Kevin Graeme
> 
> 
> > -----Original Message-----
> > From: Bill Wheatley [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, September 03, 2002 3:42 PM
> > To: CF-Community
> > Subject: Re: PC memory questions
> >
> >
> > bah 162 bucks for RDAM vs 90 bucks for DDR its a big difference for some.
> > Much less if you go for the 1066MHZ RDAM its 304 for a stick of 512.
> >
> > Yea the board supports upto 2 gigs but does it have 4 ram slots
> > or 3 or just
> > 2?
> > I've seen boards say they can handle a 1 gig registered dimm and only to
> > find its flaky as hell.
> >
> >
> >
> >
> > Bill Wheatley
> > Senior Database Developer
> > Macromedia Certified Advanced Coldfusion Developer
> > EDIETS.COM
> > 954.360.9022 X159
> > ICQ 417645
> > ----- Original Message -----
> > From: "Kevin Graeme" <[EMAIL PROTECTED]>
> > To: "CF-Community" <[EMAIL PROTECTED]>
> > Sent: Tuesday, September 03, 2002 4:24 PM
> > Subject: RE: PC memory questions
> >
> >
> > > The P4 is generally best matched with Rambus memory. The PC800
> > RDRAM gives
> > > 3.2GB/s memory transfer. The PC266 gives 2.1GB/s.
> > >
> > > With that said, I would still go with the DDR system. The difference in
> > > speed with the Rambus vs. DDR is in Rambus's favor, but the DDR is no
> > > slouch. The difference in price these days is negligible, so that's not
> > > really a factor. And the other components in the system will still
> > > bottleneck much of the difference. It really comes down to ethics vs.
> > > theoretical performance.
> > >
> > > Rambus tried to sue the pants off of other memory vendors for
> > using their
> > > proprietary tech. But Rambus was later found to have "stolen" the ideas
> > for
> > > much of the architecture from JEDEC, the orginization that defines
> > industry
> > > standards for memory. They served on the JEDEC commitee and weren't
> > exactly
> > > honest about what patents they had and were working on. They were even
> > sued
> > > by their own board.
> > >
> > > So do you go with the best performance, or do you support standards at a
> > > very slight decrease in performance? I build my own systems and I'm
> > > extremely happy with my DDR based i845e system.
> > >
> > > As for 1GB vs 512MB, if you don't whimper in terror of the
> > extra $180 then
> > > go ahead and spend the money. The i845e specs support up to 2GB.
> > >
> > > Kevin Graeme
> > >
> > >
> > >
> > 
> 
______________________________________________________________________
Get the mailserver that powers this list at http://www.coolfusion.com

Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists

Reply via email to