Dear Martin,

thanks for the hint with the definition term! I would therefore like to propose 
to name and define the discussed variable:

"volume_scattering_coefficient_in_air_due_to_ambient_aerosol_assuming_mie_scattering"

The volume scattering coefficient is the fractional change of radiative flux 
per unit path length due to redirection of an incident light beam by a 
component in the reference volume. "Aerosol" means the suspended liquid or 
solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol 
that has taken up ambient water through hygroscopic growth. The extent of 
hygroscopic growth depends on the relative humidity and the composition of the 
aerosol. The specification of a physical process by the phrase "due_to_" 
process means that the quantity named is a single term in a sum of terms which 
together compose the general quantity named by omitting the phrase. A phrase 
assuming_condition indicates that the named quantity is the value which would 
be obtained if all aspects of the system were unaltered except for the 
assumption of the circumstances specified by the condition. "mie scattering" 
means that the scattering coefficient is calculated assuming spherical 
particles described by one refractive index for the whole particle volume.

Best regards,
Markus

_______________________________________
Dr. Markus Fiebig

Dept. Atmospheric and Climate Research (ATMOS)
Norwegian Institute for Air Research (NILU)
P.O. Box 100
N-2027 Kjeller
Norway

Tel.: +47 6389-8235
Fax : +47 6389-8050
e-mail: [email protected]
skype: markus.fiebig


-----Original Message-----
From: Schultz, Martin [mailto:[email protected]] 
Sent: Mittwoch, 7. März 2012 12:32
To: Markus Fiebig; [email protected]
Cc: Shankar, Uma ([email protected])
Subject: RE: warming up old stuff - part 1: aerosol mie scattering

Dear Markus,

     good to hear that you are taking this up as a GAW initiative. Personally I 
wouldn't have a problem with your suggestion, but I'd like to refer this 
discussion to the more aerosol-oriented community. Small change (lowercase 
"mie"). Hence your name would read 
"volume_scattering_coefficient_in_air_due_to_ambient_aerosol_assuming_mie_scattering"
  

Cheers,

Martin

PS: I think it would be appreciated if you can also suggest a definition term 
(basically summarizing your thoughts from the last email). 


> -----Original Message-----
> From: Markus Fiebig [mailto:[email protected]]
> Sent: Wednesday, March 07, 2012 12:24 PM
> To: Schultz, Martin; [email protected]
> Cc: Shankar, Uma ([email protected])
> Subject: RE: warming up old stuff - part 1: aerosol mie scattering
> 
> Dear Martin,
> 
> thanks for filling me in on the background of this discussion! This 
> must have happened before I joined the mailing list, and I do need to 
> admit it's a hassle to read through the whole archive.
> 
> I do see your point, i.e. that you describe a modelled variable, but I 
> still think it is self-contradicting to call the variable extinction 
> coefficient, and then confine this to aerosol scattering within one 
> and the same variable name. I actually wouldn't be so concerned if the 
> syntax philosophy didn't conflict with the variable names I'm about to 
> propose on behalf of the WMO Global Atmosphere Watch (GAW) aerosol 
> programme. The names are going to be of the type 
> "volume_scattering_coefficient_in_air_due_to_dry_aerosol",
> which in fact isn't defined yet.
> 
> How about calling your variable
> 
> "volume_scattering_coefficient_in_air_due_to_ambient_aerosol_assuming
> _Mie_scattering"  ?
> 
> That would avoid the self-contradiction, it would fit into the syntax 
> philosophy used so far, and it would still express clearly that it is 
> a model output variable with an underlying assumption.
> 
> Best regards,
> Markus
> 
> _______________________________________
> Dr. Markus Fiebig
> 
> Dept. Atmospheric and Climate Research (ATMOS) Norwegian Institute for 
> Air Research (NILU) P.O. Box 100
> N-2027 Kjeller
> Norway
> 
> Tel.: +47 6389-8235
> Fax : +47 6389-8050
> e-mail: [email protected]
> skype: markus.fiebig
> 
> 
> -----Original Message-----
> From: Schultz, Martin [mailto:[email protected]]
> Sent: Mittwoch, 7. März 2012 11:16
> To: Markus Fiebig; [email protected]
> Cc: Shankar, Uma ([email protected])
> Subject: RE: warming up old stuff - part 1: aerosol mie scattering
> 
> Dear Markus,
> 
>        thanks for the thoughtful response. I cc this to Uma Shankar 
> who had sent me the RSIG (http://badger.epa.gov/rsig/) CMAQ variable 
> list from where this suggestion originated. CMAQ is of course a model. 
> I don't think it would hurt to have also standard_names for pure model 
> quantities, but I agree with you that one may have to phrase and define this 
> more clearly.
> The name you propose is already in the list, and the suggestion was to 
> include a more specific term to denote the specific contribution from 
> Mie scattering.
> 
> Best regards,
> 
> Martin
> 
> PS: original proposal was
> "* How can we get more specific about the "extinction coefficient"? In 
> particular, we would like to express something like 
> "..._due_to_Mie_scattering". But does this work with "
> volume_extinction_coefficient_in_air_due_to_ambient_aerosol". The new 
> name would then become 
> "volume_extinction_coefficient_in_air_due_to_Mie_scattering_of_ambient
> _aerosol" ? (and would "Mie" be spelled with "M" or "m"?)"
> 
> > -----Original Message-----
> > From: Markus Fiebig [mailto:[email protected]]
> > Sent: Wednesday, March 07, 2012 9:31 AM
> > To: Schultz, Martin; [email protected]
> > Subject: RE: warming up old stuff - part 1: aerosol mie scattering
> >
> > Dear all,
> >
> > please excuse if I come in late into this discussion, but I would 
> > like to make a few comments about the proposed variable name
> >
> >
> "volume_extinction_coefficient_in_air_due_to_mie_scattering_of_ambient
> > _aerosol"
> >
> > As it is written above, the name is self-contradicting. The aerosol 
> > extinction coefficient is defined to include both, particle 
> > scattering and absorption. The part of the aerosol extinction 
> > coefficient that is due to particle scattering is commonly referred 
> > to as aerosol scattering coefficient. Also, I need to apologise for 
> > not having followed the discussion concerning the use of the term 
> > "mie", but it appears rather to confuse than to clarify in the 
> > context here. Even though the term Mie-particle is colloquially used 
> > for a spherical, internally well mixed aerosol particle, such a 
> > particle exists only in theory or in some numerical model. If the 
> > variable name is also to be used
> for an observed quantity, which I think it should, the term "Mie" 
> should be avoided.
> >
> > How about putting this much simpler, and name the property:
> >
> > "volume_scattering_coefficient_in_air_due_to_ambient_aerosol"
> >
> > or, to avoid even more confusion:
> >
> > "volume_scattering_coefficient_at_stp_in_air_due_to_ambient_aerosol"
> >
> > Regards,
> > Markus
> >
> >
> >
> > _______________________________________
> > Dr. Markus Fiebig
> >
> > Dept. Atmospheric and Climate Research (ATMOS) Norwegian Institute 
> > for Air Research (NILU) P.O. Box 100
> > N-2027 Kjeller
> > Norway
> >
> > Tel.: +47 6389-8235
> > Fax : +47 6389-8050
> > e-mail: [email protected]
> > skype: markus.fiebig
> >
> 
> ----------------------------------------------------------------------
> ---------
> ----------------------------------------------------------------------
> ---------
> Forschungszentrum Juelich GmbH
> 52425 Juelich
> Sitz der Gesellschaft: Juelich
> Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498 
> Vorsitzender des Aufsichtsrats: MinDir Dr. Karl Eugen Huthmacher
> Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender), Karsten 
> Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt, Prof. Dr. 
> Sebastian M. Schmidt
> ----------------------------------------------------------------------
> ---------
> ----------------------------------------------------------------------
> ---------
> 
> Kennen Sie schon unsere app? http://www.fz-juelich.de/app
_______________________________________________
CF-metadata mailing list
[email protected]
http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata

Reply via email to