Was SP6a but on before or after IIS?
If it was put on before IIS then the part that says do not allow the
::$DATA may have been overwritten.
When i set up a box I always put the latest SP on, then Install IIS then
the SP again. So you may just want to put SP6a on the box again and see if
that helps.
At 04:08 PM 4/2/2000 +0100, you wrote:
>At 10:33 02/04/00 -0400 Marius Milosav said....
> >There are a few things you can do:
> >1) I know that SP5 doesn't have this problem so you may want to go back to
> >SP 5.
> >2) Encrypt your code
> >3) deselect read permission for *.cfm files
> >4) one list member suggested once to do the following mapping:
> > *.cfm::$DATA to iscf.dll
>
>
>Thanks Marius, I have done this after much searching on M/soft
>site, the mapping is suggested as a fix referring to SP4 or maybe 5
>they certainly do not refer to it being required on 6 , 6a or 6a revised.
>
>I can not understand why this reappears at the issue of every new
>service pack!
>
>Thanks
>
>
>Gordon
>
>
>
> >
> >Check also the following site for a hot fix
> >ftp://ftp.microsoft.com/bussys/IIS/iis-public/fixes/usa/security/iis4-datafi
> >x/
> >
> >Allaire Knowledge base has some information too.
> >
> >Marius Milosav
> >www.scorpiosoft.com
> >Virtual Help Desk Demo (VHD) version 2.6
> >www.scorpiosoft.com/vhd/login.cfm
> >
> >
>------------------------------------------------------------------------------
>Archives: http://www.eGroups.com/list/cf-talk
>To Unsubscribe visit
>http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or
>send a message to [EMAIL PROTECTED] with 'unsubscribe' in
>the body.
------------------------------------------------------------------------------
Archives: http://www.eGroups.com/list/cf-talk
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or send a
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
