>From what I see if you have the view open, you can see all the framework XML settings like coldspring if you have it, reactor and MG:U and fusebox etc.
You can also drill in to each node as well. On 5/10/07, Robertson-Ravo, Neil (RX) <[EMAIL PROTECTED]> wrote: > > Yep, I have a project (model-glue), I have a file open... Now what? :-) > > > > > > > "This e-mail is from Reed Exhibitions (Gateway House, 28 The Quadrant, > Richmond, Surrey, TW9 1DN, United Kingdom), a division of Reed Business, > Registered in England, Number 678540. It contains information which is > confidential and may also be privileged. It is for the exclusive use of > the > intended recipient(s). If you are not the intended recipient(s) please > note > that any form of distribution, copying or use of this communication or the > information in it is strictly prohibited and may be unlawful. If you have > received this communication in error please return it to the sender or > call > our switchboard on +44 (0) 20 89107910. The opinions expressed within > this > communication are not necessarily those expressed by Reed Exhibitions." > Visit our website at http://www.reedexpo.com > > -----Original Message----- > From: Charlie Griefer > To: CF-Talk > Sent: Wed May 09 19:54:02 2007 > Subject: Re: Frameworks view in CFEclipse > > open a file that's part of a project that's part of a framework :) > > On 5/9/07, Robertson-Ravo, Neil (RX) > <[EMAIL PROTECTED]> wrote: > > OK, I have it now... Errm, how do you use it? :-) > > > > > > > > > > > > "This e-mail is from Reed Exhibitions (Gateway House, 28 The Quadrant, > > Richmond, Surrey, TW9 1DN, United Kingdom), a division of Reed Business, > > Registered in England, Number 678540. It contains information which is > > confidential and may also be privileged. It is for the exclusive use of > the > > intended recipient(s). If you are not the intended recipient(s) please > note > > that any form of distribution, copying or use of this communication or > the > > information in it is strictly prohibited and may be unlawful. If you > have > > received this communication in error please return it to the sender or > call > > our switchboard on +44 (0) 20 89107910. The opinions expressed within > this > > communication are not necessarily those expressed by Reed Exhibitions." > > Visit our website at http://www.reedexpo.com > > > > -----Original Message----- > > From: Mark Drew > > To: CF-Talk > > Sent: Wed May 09 18:37:43 2007 > > Subject: Re: Frameworks view in CFEclipse > > > > Some other people had those errors.. but that was because they had an > > old version of CFEclipse. > > > > I would say disable the features, uninstall them (through the update > > manager) and then install them again. > > > > MD > > > > On 5/9/07, Andrew Scott <[EMAIL PROTECTED]> wrote: > > > Doesn't work for me here, I get all sort of errors when I try to use > it. > > > > > > I even went to the trouble of removing cfeclipse and d/loading it > again > > but > > > no matter how hard I try the org.cfeclispe.feature always errors and > the > > > cfmappings in the preferences throws errors as well. > > > > > > > > > > > > On 5/10/07, Mark Drew <[EMAIL PROTECTED]> wrote: > > > > > > > > Also there is an update to CFEclipse for the view to work, so you > need > > > > to update CFEclipse too. > > > > > > > > MD > > > > > > > > On 5/9/07, Charlie Griefer <[EMAIL PROTECTED]> wrote: > > > > > Window -> Show View -> Other -> CFML Frameworks -> CFML Frameworks > > > > Explorer. > > > > > > > > > > ? > > > > > > > > > > On 5/9/07, Robertson-Ravo, Neil (RX) > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > How on earth do you "activate" it? I have 1.3.1.3 installed but > I > > > > can't see > > > > > > it anywhere? > > > > > > > > > > > > Any pointers here? I have been happily using CFEclipse for years > now > > > > and > > > > > > never had a problem with updates etc.. > > > > > > > > > > > > > > > > > > > > > > > > "This e-mail is from Reed Exhibitions (Gateway House, 28 The > > Quadrant, > > > > > > Richmond, Surrey, TW9 1DN, United Kingdom), a division of Reed > > > > Business, > > > > > > Registered in England, Number 678540. It contains information > which > > > > is > > > > > > confidential and may also be privileged. It is for the > exclusive > > use > > > > of the > > > > > > intended recipient(s). If you are not the intended recipient(s) > > > > please note > > > > > > that any form of distribution, copying or use of this > communication > > or > > > > the > > > > > > information in it is strictly prohibited and may be > unlawful. If > > you > > > > have > > > > > > received this communication in error please return it to the > sender > > or > > > > call > > > > > > our switchboard on +44 (0) 20 89107910. The opinions expressed > > within > > > > this > > > > > > communication are not necessarily those expressed by Reed > > > > Exhibitions." > > > > > > Visit our website at http://www.reedexpo.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Create robust enterprise, web RIAs. Upgrade & integrate Adobe Coldfusion MX7 with Flex 2 http://www.adobe.com/products/coldfusion/flex2/?sdid=RVJP Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:277521 Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
