as you have said CF9 pages continue to run fine, this means that cf9 is still running. CF10 installs alongside it. I would suggest you shut down the CF9 services to make sure you are in fact using CF10. You also may need to use the internal web server to access the cfadmin instead if the one you are trying to access if still CF9. It should have asked you during install where you wanted to put it, so make sure http://127.0.0.1/CFIDE/administrator/index.cfm points to that location and is using the cf connector.
On Thu, Apr 24, 2014 at 8:16 PM, John Pullam <[email protected]>wrote: > > I have just installed CF10 on my development machine. I have been happily > running CF9 for several years and decided it was time to move on. The > actual install seemed to go smoothly but at the end when it tells you it is > going to the configuration wizard nothing happens. It simply serves up a > blank page from the URL http://127.0.0.1/CFIDE/administrator/index.cfm > > The CF9 pages continue to run fine but any attempt to pull up the > administrator fails (being the same URL). > > I tried this twice. The first time it failed with the URL bringing up the > CF9 administrator, the second time it brings up the blank page. > > I looked in the event log and at my started tasks to see if I could find a > clue but nothing appeared. Could sure use some ideas of what to do! > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:358410 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
