one of my development boxes is set up this way. She is going to need
atleast 2 static IP addresses and 2 nic cards if she wants to do the domain
name resolving herself. If domain name resolution is not an issue, and her
ISP gives her dynamic IP addresses, then she will have to go to the command
prompt and type IP config so she knows what IP address her ISP has given her
for that session. This of course would be the IP address you would need to
type into your browser to find her box.
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: "CF-Talk" <[EMAIL PROTECTED]>
Sent: Monday, February 26, 2001 5:48 AM
Subject: Re: WOT: Serving to the web using W2K, IIS and DSL
> In most cases if the serving of the website is not for commercial, but
> personal reasons as in the case of letting other team members see the
work,
> it should be no problem. The only issues would be rather she has a static
> or dynamic IP Address as configurations will have to be change according
to
> what the IP is at the time of boot. Find out about static or dynamic and
I
> can help form there.
>
> Robert
> ----- Original Message -----
> From: "Jeffry Houser" <[EMAIL PROTECTED]>
> To: "CF-Talk" <[EMAIL PROTECTED]>
> Sent: Monday, February 26, 2001 11:41 AM
> Subject: Re: WOT: Serving to the web using W2K, IIS and DSL
>
>
> >
> > It depends upon the terms and conditions of her agreement with the
DSL
> > company.
> >
> > To host something, all you need is an internet connection. You can
do
> > it on a dial-up (although you won't get very good performance). All
cable
> > modem agreements I've seen forbid using the cable modem to host a
> > server. DSL? Have her check her agreement. It would depend upon
whether
> > you have Asynchronous DSL or Synchronous DSL. (One has the same speed
> both
> > ways, one is faster at downloading than sending, I forget which is
> > which). I imagine same speed both ways would allow it, but one-way
speed
> > would not. Of course, that all depends on the agreement.
> >
> >
> > At 05:53 AM 02/26/2001 -0700, you wrote:
> > >Sorry for the off-topic post.
> > >
> > >I have a co-worker halfway across the nation who is building some GIS
> > >applications using ARC IMS. She's running a W2K machine, IIS and has a
> DSL
> > >connection to the web. Can she serve her own applications to the web
so
> the
> > >rest of the team can see what she's doing?
> > >
> > >A point in the right direction would be much appreciated!
> > >
> > >Erika Foster
> > >engineering-environmental Management
> > >Applications Developer
> > >(505) 866-1654
> > >[EMAIL PROTECTED]
> > >
> > >
> > >
> >
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
