This means that you are browsing it in your studio and that you have not
created a development mapping to the server you are working from. This can
be resolved in two ways, depending on whether you are using a full server or
a local version with PWS (or whatever). The key to either is that you have
RDS turned on. If you are working from a local version then you should be
able to turn it on yourself, if not you will have to turn in on the remote
server.
It also depends on the version of studio you are running, but the basics are
the same:
1. Click on the Development mapping button, or go to Debug and choose
Development mapping, or use Alt+M (keyboard shortcut).
2. On the DM window choose your Server (localhost or whatever)
3. In Studio Path click on the folder button and find the website folder or
specific file you are after - the key here is to use the same path that you
are using in your Files Window - as if you use a different path to the
server it will not show
4. Next write in the CF server path - this is the physical path used by the
server - so you will need to know where the files are on the server (or
local server) - so while the studio path may be something like
\\REMOTESERVER\wwwroot\INTRANET the CFserver path maybe
C:\InetPub\wwwroot\intranet or whatever - either way it will probably be
different.
5. Finally choose the browser path - this will be an http formatted path -
so it may be http://www.remoteserver.com/intranet (or something)
Then press OK - the best way to use this is to use folders rather than
files, because then you will be able to view "all" the files in your project
from one development mapping.
HTH
James
"The Force is strong in this one..." - Darth Vader
-----Original Message-----
From: Manolo Rivero [mailto:[EMAIL PROTECTED]]
Sent: 21 March 2001 12:16
To: CF-Talk
Subject: Newbie question
Hi
I've got a problem with my first cfm template.
When I try to browse it, appear the following message: "The Coldfusion file
tou are trying to browse cannot be resolved into an URL. Add server
development mapping to enable URL resolution for this file."
What should I do?
Thanks in advence
Manuel
Canary Islands
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
