This has happened to me a few times..
If i make a change and upload it all seems to work fine for a while and then
it goes back
to the old code. It did that for a while until i stopped uploading over the
code i had
and deleted the specific files first and then re-uploaded them from scratch.
That seemed to fix my problem. i think its an unix ftp thing..
Alex,
----- Original Message -----
From: "Carol Bluestein" <[EMAIL PROTECTED]>
To: "CF-Talk" <[EMAIL PROTECTED]>
Sent: Monday, September 17, 2001 9:55 AM
Subject: Re[2]: Mystery:Code dissappears/changes on Unix Server
> Whew, Phillip. It is really good to know we are not alone.
> The only difference is that we save each page on the UNIX
> server, not on our NT boxes. So, it is working on the UNIX
> server when we end our day. Next day, broken.
>
> It doesn't happen a lot, but when it does it is very frustrating.
>
> We asked our consultants and they checked with Allaire.
> They couldn't help us at all.
>
> So, when we are at critical stages, we make our own backups
> and don't rely on the agency-wide back-ups so we can
> put the "working" code back on immediately. Then when
> things seem to be working perfectly for weeks on end,
> we get lazy and then BAM, it happens again.
>
> Thanks again for your input.
> Carol
>
>
> Carol L. Bluestein
> Senior Programmer
> NYS Office of Real Property
> 518-486-6335
> [EMAIL PROTECTED]
>
>
> ____________________Reply Separator____________________
> Subject: Re: Mystery:Code dissappears/changes on Unix Server
> Author: [EMAIL PROTECTED]
> Date: 9/14/01 11:52 AM
>
> It sounds like something I had to deal with. I would work all day, upload
> code, it would work and I would move on. Then the next day the code would
> stop working. I would look at it and it would be something other than the
> finial upload. I would upload the page again and it would be fine.
>
> We were working on NT and puting it on a Unix seerver too. Never figured
out
> why it did it but I do know what you are talking about.
>
> Phillip
>
> > Hi all.
> >
> > We have been experiencing code problems on our Unix server.
> > Pages that are working on day 1 are NOT working on day 2.
> > It is NOT multiple developers hitting the same code at the
> > same time as far as we can track. It is NOT that changes
> > are not being received by the server, we can see the effects
> > of changed code.
> >
> > We are working on an NT platform with our data stored on
> > SYBASE IQ12 and ColdFusion on a UNIX platform.
> >
> > Any and all possible solutions would be appreciated and
> > will be explored.
> >
> > Thanks,
> > Carol
> >
> >
> > Carol L. Bluestein
> > Senior Programmer
> > NYS Office of Real Property
> > 518-486-6335
> >
>
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Get the mailserver that powers this list at http://www.coolfusion.com
FAQ: http://www.thenetprofits.co.uk/coldfusion/faq
Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
