Hi Andrew I suspect you bad experience with FR in the past was due to the log file expaned and filling up the hard disk. We had the same problem when our SysAdmin installed it for me and he gave up. After a while I re-installed it and played with the settings and all was fine. I think the issue was that crash protection logging is on by default.
Cheers Matthew On Jan 27, 4:35 pm, Andrew Myers <[email protected]> wrote: > Hi Kai, > > The rationale I was using was that if there was a performance problem > in my code that became more evident when FR is running, that FR might > be able to at least keep the server alive while I was figuring out > what was happening. > > However, so far so good and I'll take your advice to err on the side > of caution and just watch it for a while. > > Cheers, > Andrew. > > 2010/1/27 Kai Koenig <[email protected]>: > > > What'd be the purpose? Just thinking loud here - if you fear FR to > > be causing issues, I wonder (and seriously would have no clue what's > > going to happen :-) if it's crash protection would help you. > > > Be aware that with crash protection you'd need to set your thresholds > > very sensible otherwise you'd run into issues on that end. I'd think > > you'd need to monitor your system for a while before able to define > > those properly. > > > Cheers > > Kai > > >> Hi again, > > >> We've asked our host to put FusionReactor back on our production box. > >> All appears well but I'm half expecting things to grind to a halt at > >> some stage. > > >> Would enabling the Crash Protection settings be worth a try? If so > >> does anyone have any advice on some suggestions values in various > >> settings? > > >> Timeout Protection: > >> (seconds) > > >> Memory Protection: > >> (%) > > >> Request Protection > > >> Thanks again to all who have offered assistance so far. > > >> Andrew. > > >> -- > >> You received this message because you are subscribed to the Google Groups > >> "cfaussie" group. > >> To post to this group, send email to [email protected]. > >> To unsubscribe from this group, send email to > >> [email protected]. > >> For more options, visit this group > >> athttp://groups.google.com/group/cfaussie?hl=en. > > > _________________________________________________ > > Kai Koenig - Ventego Creative Ltd > > ph: +64 4 476 6781 - mob: +64 21 928 365 / +61 450 132 117 > > web:http://www.ventego-creative.co.nz > > blog:http://www.bloginblack.de > > twitter:http://www.twitter.com/agentK > > > -- > > You received this message because you are subscribed to the Google Groups > > "cfaussie" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group > > athttp://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups "cfaussie" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
