Well, not all "outofmemory" errors are about running out of heap (same as in CF
itself). But before going there, here are a couple of things to check.
First, are you really positive that the changes you're making to the ini file
are
really being picked up? Besides looking at the logs, one thing you can do
easily is
enable the "show heap status" feature (in Preferences>General). That will show
an icon
in the lower right (by default) that will show how much memory is used and
total/allocated ("<used>M of <total>M"). But note that the total size does not
equal
max (assuming the heap min is not set to equal max). If you mouse over the
memory
status feature, it will show all 3 numbers, so you can confirm if the change
you made
took effect.
But let's assume you have increased the heap, and are still having the problem.
Second, then, like Dale said, it could be simply that you still need to
allocate still
more. Of course, there's a limit to how large you can go. Again, as with CF,
you will
hit a limit if running on a 32-bit OS.
Finally, beyond that, as I said at the outset, it may not be about really
running out
of heap. Do you have more detail on the outofmemory error message? Does it
refer to
either "heap space", "permgen", "stack", "native thread", or "swap space"? Some
errors
don't require increasing the heap to resolve them. In fact, sometimes it's the
opposite (the heap can be so high as to squeeze the space left within the OS
process
size max, so lowering it gives more room for the stack, for instance.) And some
problems only happen because other applications on the machine are squeezing the
memory available to the app reporting the error.
/charlie
From: [email protected] [mailto:[email protected]] On Behalf Of
Steve
Onnis
Sent: Wednesday, June 16, 2010 10:55 PM
To: [email protected]
Subject: RE: [cfaussie] Flash builder plugin for Coldfusion Builder
That didnt work. Still same error
_____
From: Paul Kukiel [mailto:[email protected]]
Sent: Thursday, 17 June 2010 12:44 PM
To: [email protected]
Subject: Re: [cfaussie] Flash builder plugin for Coldfusion Builder
You can try these settings here. I actually bumped my settings higher to
improve
performance.
http://www.adrocknaphobia.com/post.cfm/update-your-coldfusion-builder-beta-settings-fo
r-flash-builder-4-beta
Honestly I have had much more luck running ColdFusion Builder as the plugin to
FlashBuilder so that might be your other option.
Paul.
On 17/06/2010 12:27 PM, Steve Onnis wrote:
I am trying to load up Flash Builder 4 plugin into Coldfusion Builder. When i
try to
switch to Design Mode i keep getting an Out of Memory error. Has anyone else
had this
happen and know of a way to fix it?
Steve
--
You received this message because you are subscribed to the Google Groups
"cfaussie"
group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/cfaussie?hl=en.
--
You received this message because you are subscribed to the Google Groups
"cfaussie"
group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/cfaussie?hl=en.
--
You received this message because you are subscribed to the Google Groups
"cfaussie"
group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/cfaussie?hl=en.
--
You received this message because you are subscribed to the Google Groups
"cfaussie" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/cfaussie?hl=en.
