> it *might* just be (if we are lucky!) the debugging output > that's hanging up the processing.
I have an application that's fairly CFC heavy - turning on debugging sends the average page execution time from around 80-90ms up to 300-400ms... Turn it off again and we're back to 80-90ms. That's proof enough for me... :) Tim. ------------------------------------------------------- OUR NEW SITE IS NOW LIVE Visit our new website at http://www.rawnet.com/ and race around the beautiful Bracknell streets at http://xmas.rawnet.com/ ------------------------------------------------------- Tim Blair Web Application Engineer, Rawnet Limited Direct Phone : +44 (0) 1344 393 441 Switchboard : +44 (0) 1344 393 040 ------------------------------------------------------- This message may contain information which is legally privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any unauthorised disclosure, copying, distribution or use of this information is strictly prohibited. Such notification notwithstanding, any comments, opinions, information or conclusions expressed in this message are those of the originator, not of rawnet limited, unless otherwise explicitly and independently indicated by an authorised representative of rawnet limited. ------------------------------------------------------- ---------------------------------------------------------- You are subscribed to cfcdev. To unsubscribe, send an email to [EMAIL PROTECTED] with the word 'unsubscribe cfcdev' in the message of the email. CFCDev is run by CFCZone (www.cfczone.org) and supported by Mindtool, Corporation (www.mindtool.com). An archive of the CFCDev list is available at www.mail-archive.com/[EMAIL PROTECTED]
