Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
That is right about using concrete block, they are meant to be used core hole up for down pressure loads. Standing on it's side will crush with any foward or side pressure. Tom B. ----- Original Message ----- From: John Nasta <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, November 01, 2001 7:59 AM Subject: RE: [Chevelle-List] 67 Frame > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > Not only should you not use blocks, you also shouldn't stack them on their > sides the way you did (holes facing out). That makes them even weaker. The > holes should be on top & bottom so that the weight is supported by solid > cement rather than air. That is how these blocks were meant to be used. > > So, you just painted the frame right there and then dropped the body back > onto it? It doesn't look like you could have rolled it out. Not saying this > is bad, just haven't seen it before. > > John > > -----Original Message----- > DO NOT USE BLOCKS when I was moving them to put them away 3 broke right > apart. Too close for comfort. > > These links are pictures of my body going back on frame > http://members.tripod.com/benj30/id304.htm > http://members.tripod.com/benj30/id303.htm > > > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
