Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I was told to run a #10 wire from the battery junction to the coil on the HEI. How can I run this through the ignition switch? -----Original Message----- From: Spencer, Darrell [mailto:[EMAIL PROTECTED]] Sent: Monday, November 26, 2001 1:30 PM To: '[EMAIL PROTECTED]' Subject: RE: [Chevelle-List] 71 chevelle Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------ Wait a minute. What relay? I don't have a relay between the ignition switch and the coil on my '70. This could be a possible problem, as well - if the relay isn't de-energizing. Darrell Spencer -----Original Message----- From: DeCicco, Don [mailto:[EMAIL PROTECTED]] Sent: 26 November, 2001 11:23 AM To: '[EMAIL PROTECTED]' Subject: [Chevelle-List] 71 chevelle Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------ I have a 71 chevelle 454 that I restored over the past year. It is at the body shop being painted as I wrire this. On occasion the engine will not shut off with the key. I have to pull the + wire to the HEI dist. coming from the relay on the firewall. Any help would be appreciated. ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
