Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
Yes, its a problem. I've had the bottom on both sides crack over the past 8 years. Luckily I was sitting still when I found one and just parking when the other broke. Boxing sounds worth while to me. George 66 Elcamino In sunny Phoenix ----------------------- Dave Henderson wrote: > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > What was done to the arm? Where did you weld, was it just a plate > over the bottom, or only on the ball-joint end, or around the > bushings, or ? > > Have you any pictures? > > Thanks, > Dave. > > >> Heard of and had it done! I had cracks in mine when I converted to the > >> Global West upper arms. I had already done the disk brake conversion a > >> few years earlier. I went to the Pomona Swap Meet and picked up a set > >> of replacement lowers and had them reinforced by the shop that did the > >> installation of the upper arms and new bushings. > -- > C'est de la bombe, sur le beat je vais me lacher > par� ou pas par�, mon style est enclench�... > -Dubmatique > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] -- CLick on next line to: MAILTO:[EMAIL PROTECTED] Netzone & Goodnet address CLOSED ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
