Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
> From: Dave Henderson > Subject: Re: [Chevelle-List] Boxing front suspension arms? > > What was done to the arm? Where did you weld, was it just a plate > over the bottom, or only on the ball-joint end, or around the > bushings, or ? > > Have you any pictures? I can look to see how easily I can snap a few pix of the arms. This was done a while ago, but as I recall, they welded in narrow pieces of metal to strengthen the ball joint area where the arms are prone to crack. Brad Waller '66 Convertible | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFGs '67 Chevelle | ex-SS396 | 355/700R4 | '79 F-Body Brakes > Thanks, > Dave. > > >> Heard of and had it done! I had cracks in mine when I > converted to the > >> Global West upper arms. I had already done the disk > brake conversion a > >> few years earlier. I went to the Pomona Swap Meet and > picked up a set > >> of replacement lowers and had them reinforced by the shop > that did the > >> installation of the upper arms and new bushings. > -- > C'est de la bombe, sur le beat je vais me lacher > par� ou pas par�, mon style est enclench�... > -Dubmatique > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
