Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
> From: [EMAIL PROTECTED] > Subject: [Chevelle-List] radiator hose help > > Restoring a 66 Chevy Malibu , engine is a 350 cu. in. . Cant > seem to match up the upper and lower hoses . A guy gave me a > box of 18 or so hoses, each bends every which way but the > right way. The radiator is stock and came with the car. > Any suggestions , part numbers any kinda help at all wouuld be > appreciated. This is my first resto and its been a blast so > far...thanks !! I've been through the same thing (1967 SS396 with a 350 motor). Unfortunately for you, I had it easier, as I was replacing hoses. I was able to go to a parts shop with my old hose and compare a few hundred hoses until I found one I could use. I do remember that I had to shorten the hose. It had the right bends, but was too long. I will look to see if I can read part numbers off of my hoses and get them to you. When you go to a parts book, look at the 327 hoses for 1966 and also look at 350 hoses for a 1969 for potential ideas. Brad Waller '66 Convertible | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFGs '67 Chevelle | ex-SS396 | 355/700R4 | '79 F-Body Brakes ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
