Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I have never used poly bushing because my cars have always been drivers rather than race cars. I also usually just tape the shims to the inner fender w/ 2" masking tape above where they belong. Baggies? We don't need no stinking baggies! John Nasta Old Car Network http://oldcarnetwork.com -----Original Message----- <snip> Next came up the question of polyurethane verses rubber bushings. Then he asked me "if after 30 years of use and with bushings still in servicable condition, why change". So I didn't since my car is a daily driver. He said polyurethane "anything" will squeek until it drives you nuts. Unless it is a race car and subjected to extreme side loading, forget polyurethane. His last tip was to keep all four sets of shims in separate bags and marked where they came from. That way the car will remain close enough to drive in for an alignment. It works! ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
