Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
Sorry andre I don't have a clue. It came out of the camaro I have. It was behind an early 327 with 4 speed if that helps. I gave the 4 speed / clutch /pressure plate/flywheel to a local 16 year old for his el camino. I know very little about it. If i ever get serious about the camaro, I was gonna try to contact Lakewood for their comendations about mounting, etc. I couldn't even find a part number on it. rick On Tue, 26 Feb 2002 17:27:32 +0100 (CET) =?iso-8859-1?q?Tigergutt?= <[EMAIL PROTECTED]> writes: > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > Rick, > > Is it supposed to be used with a 3/8" (?)plate ?? > > Andr� > > --- [EMAIL PROTECTED] skrev: > > > Replies to this message are sent to The Chevelle Mailing > > List > > > ------------------------------------------------------------ > > > > Andre > > Just the bellhousing. From Engine mounting surface to > > trans mount surface. > > rick > > ---------- "Tigergutt" <[EMAIL PROTECTED]> writes: > > > > From: "Tigergutt" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Subject: RE: [Chevelle-List] help !!!! manual trans + > > Computer problems > > Date: Mon, 25 Feb 2002 22:11:58 +0100 > > > > > > Replies to this message are sent to The Chevelle Mailing > > List > > > ------------------------------------------------------------ > > > > Richard, > > > > Is that included the plate or is it just the bellhousing > > ? > > > > Thanks ! > > > > Kind Regards > > Andr� > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] On Behalf > > Of richard a > > schaefer > > Sent: 24. februar 2002 19:50 > > To: [EMAIL PROTECTED] > > Subject: Re: [Chevelle-List] help !!!! manual trans + > > Computer problems > > > > > > Replies to this message are sent to The Chevelle Mailing > > List > > > ------------------------------------------------------------ > > > > > > On Mon, 25 Feb 2002 17:46:51 +0100 "Tigergutt" > > <[EMAIL PROTECTED]> > > writes: > > > does somebody have a bellhousing lying around ?? > > > if yes, please measure it trans mounting to engine > > mounting flange. > > > > I have a lakewood in the shed and it is 6 3/8 inches. I > > can't help with > > the rest. > > rick > > > > > I could also need to know the measure of the clutch > > pressure plate > > > (flywheel > > > mounting to the contact point of the release bearing) > > > I have 0,4" less space than I should have to mount the > > release > > > bearing. > > > and I thougt that there might be some thinner clutches > > or longer > > > bellhousings around. > > > Any ideas. > > > > > > > > > I also keep getting the messages twice, if I look at > > them directly on > > > internet they are normal (once) but when I download I > > keep getting > > > them > > > twice. > > > > > > Larry (Z) > > > Please mail me some pictures of your project off list. > > > > > > thanks !! > > > > > > Andr� in (right now) sunny Italy > > > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]On Behalf > > Of Bill > > > Vander Werf > > > Sent: 25. februar 2002 16:49 > > > To: [EMAIL PROTECTED] > > > Subject: Re: [Chevelle-List] My new motor.... > > > > > > > > > Thats funny..........I have $4200 into my 454 as well. > > > My dad was visiting one day and asked how much I had > > into the motor. > > > After I > > > told him he laughed and said,"That's the total amount > > you paid for > > > your 72 > > > Torino with all the bells and whistles back in 72." > > Then I said, > > > "Shhh....don't tell my wife that." Hee hee > > > > > > Bill Vander Werf > > > > > > > > > NoNeck wrote: > > > > > > DON"T LET MY WIFE SEE THIS!!I have about $4200 into > > the motor. > > > (This > > > doesn't include many of the almost new items I had > > added to the motor > > > previously. RPM intake, the carb rebuild, headers, > > valve covers, > > > roller > > > rockers, fuel pump, Proform distributor, plug wires and > > looms, water > > > pump, > > > motor mounts, and about half of the stainless ARP > > bolts.)Josh Gin > > > (NoNeck) > > > Visit my Chevelle website www.NoNecksChevelle.com > > > > ----------------------------------------------------- > > To Unsubscribe please visit www.chevelles.net/list.html > > To start a new topic, send mail to: > > [EMAIL PROTECTED] > > > > > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > > > ----------------------------------------------------- > > To Unsubscribe please visit www.chevelles.net/list.html > > To start a new topic, send mail to: > > [EMAIL PROTECTED] > > > > > > > > rick schaefer > > 72 El camino > > http://members.home.net/jimmy4/rick1972elky.html > > ACES #00140 > > Team Chevelle #00038 > > > > ----------------------------------------------------- > > To Unsubscribe please visit www.chevelles.net/list.html > > To start a new topic, send mail to: > [EMAIL PROTECTED] > > ===== > Andr� > > ______________________________________________________ > Sjekk sn�rapporter... > fra 500 ski-destinasjoner i Europa > p� http://no.snow.yahoo.com/ > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
