Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I went with the GW upper arms and bushings. Also used their bushings in my lower arms. Spindles from 86 Caprice wagon (12") , calipers from 75/6 camaro. Hoses too. I agonized over which calipers to use. I didn't know if there were 12" specific calipers. NO! GM made very small changes in calipers over the years. They mount the same, The most significant change, was that I believe (but am still not 1000% sure) that they changed the hose threads to a metric thread about 78. I also had a difficult time with hoses. I'd heard that 72 grand prix hoses are slightly longer, but when I checked part #'s at www.advanceautoparts.com they were the same as for my 72 elky originals. The camaro hoses are a bit longer, but they are tight at full extension. rick On Thu, 14 Mar 2002 01:57:18 EST [EMAIL PROTECTED] writes: > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > Did you reuse your stock upper control arms or did you use the after > market > ones? > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
