> From: [EMAIL PROTECTED] > Subject: Re: [Chevelle-List] 67-thm400 shifter help needed > > Thanks john i checked out the website and seen what they > offer. but its unclear what needs to be done on the > installation. > If any one out there did this floorshifter modification i > need to pick your brain if possible
I have not done the changeover, but I do have a 700R4 with the cable shifter and console mount, in case that might help. Brad Waller ([EMAIL PROTECTED]) '66 Convertible | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFGs '67 Chevelle | ex-SS396 | 355/700R4 | '79 F-Body Brakes > John Sandonas wrote: > > > Hi, go to "www.shiftworks.com",,they have the > > conversion kit...also I had to use Prostick shifter > > and they fit under the stock center console with > > little or no mods...hope this help,,,John > > > > --- Robert Coyle <[EMAIL PROTECTED]> wrote: > > > I am sure some one out there ran into this problem > > > before i did this > > > weekend. > > > > > > I dropped in my 396with a thm400 behind it into my > > > 67. needless to say > > > the floor shifter will not work , the arm and the > > > pivot of the > > > shifter hits the top of the 400 there's no way this > > > mechanical linkage > > > is going to work . Is there a conversion kit for > > > this to convert it to > > > a cable shifter and keep the original shifter?? has > > > anyone done this > > > conversion ? where do i find the parts ?? any > > > info would be greatly > > > appreciated > > > THANKS ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
