Brad,
What did you do to connect the TV cable to the carb? I have seen a few
different kits..some with sliders while others snap on the nailhead on the
carb linkage.
Walt
>I have not done the changeover, but I do have a 700R4 with the cable
>shifter and console mount, in case that might help.
>
>Brad Waller ([EMAIL PROTECTED])
>'66 Convertible | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFGs
>'67 Chevelle | ex-SS396 | 355/700R4 | '79 F-Body Brakes
>
>> John Sandonas wrote:
>>
>> > Hi, go to "www.shiftworks.com",,they have the
>> > conversion kit...also I had to use Prostick shifter
>> > and they fit under the stock center console with
>> > little or no mods...hope this help,,,John
>> >
>> > --- Robert Coyle <[EMAIL PROTECTED]> wrote:
>> > > I am sure some one out there ran into this problem
>> > > before i did this
>> > > weekend.
>> > >
>> > > I dropped in my 396with a thm400 behind it into my
>> > > 67. needless to say
>> > > the floor shifter will not work , the arm and the
>> > > pivot of the
>> > > shifter hits the top of the 400 there's no way this
>> > > mechanical linkage
>> > > is going to work . Is there a conversion kit for
>> > > this to convert it to
>> > > a cable shifter and keep the original shifter?? has
>> > > anyone done this
>> > > conversion ? where do i find the parts ?? any
>> > > info would be greatly
>> > > appreciated
>> > > THANKS
>
>
>
>-----------------------------------------------------
>To Unsubscribe please visit www.chevelles.net/list.html
>To start a new topic, send mail to: [EMAIL PROTECTED]
-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]
