I found it fairly easy to remove the window and put it back. Just note the position of any bolts/nuts you take loose. Just take your time and also note how the window comes out, so you can put it back in the same way.
Another way to look at it, worst case, you can call a window repair guy to put it back in for you. :-) You might be able to change the stops to allow the window to roll further down, hopefully enough to get your window felts replaced. good luck, Jeff Fischer wrote: > Took off the door panels today. (had new and fun experience with those > window cranks!) and I want to replace the weather stripping that is on the > outside between the window and the door but the window is preventing me > from getting to three screws. The window has to come out right? I have > never done this before so if in fact the window has to come out, should I > attempt this or have it done somewhere? And I thought this was gonna be > one of the easier projects with the car. > > Thanks guys! > > -- > Jeff Fischer > Lake Elmo, MN > '71 Chevelle SS, 454, 4 spd > http://home.attbi.com/~addss/chevelle.html > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] -- Check out my webpage at http://www.ProStreetCar.com and my For Sale page at http://www.ProStreetCar.com/classifieds.html Tremec Distributor at http://www.tremectransmissions.com/ Team Chevelle membership #178 (Gold) ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
