Title: Message
Roger that!
 
----- Original Message -----
Sent: Friday, December 13, 2002 12:31 PM
Subject: RE: [Chevelle-List] Non-Chevelle tech question

Herb, If you figure this out let me know.  We've got exactly the same problem on a '90 Ram of my Dad's.  Same deal on the idle adjustment too, you can't change it. 
 
Dean Vandergriff
 
 
 
 -----Original Message-----
From: Herbert Lumpp [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 13, 2002 4:50 PM
To: Chevelle List
Subject: [Chevelle-List] Non-Chevelle tech question

Before I start driving my "new" 87 Jimmy every day, I'd like to fix one small problem, maybe someone on the list can point me in the right direction. 
 
The engine is a TBI 350 (I've never had a TBI before).  It runs great, but occasionally, when you take off from a stop the engine will stall.  Fortunately it starts right up so the stalling is more of a nuisance but I'd still like to fix it.
 
The previous owner said he replaced the Throttle Position Sensor and rebuilt the distributor.  I think there's something wrong with the TPS or TBI itself.  If I hold the rpm just above idle while holding the brake, it won't stall, but if I just let it idle where it's set it's more likely to stall when I take off.  I was going to raise the idle to see if that helped, but I didn't see an idle adjustment screw.
 
If anyone has any experience with a TBI or has any suggestions I'd really appreciate it.  Thanks. 

cYa-
 
Herb Lumpp
1966 El Camino
ACES 3509, MCC 528
http://users.adelphia.net/~hlump/

Reply via email to