Rich, I've used POR-15 on two frames. Sprayed it on (nasty stuff use respirator) blasted frames. It took a little over a quart for each frame. I top coated with Chassis Black (1.5 quarts also) Frames have been painted for 3 years and look like the day I painted them. Really tough stuff.
Dan and Rich, A trick I learned from the POR15 guy. Don't open the can of POR15. Turn it upside down and punch a small hole in the bottom edge with an awl. Squeeze out what you need and seal the hole with RTV sealer. I have a can I have about 10 holes in that I have used for little jobs. It has been over 3 years since the first hole and the POR15 is the exact consistency as the first day. Trooper ----- Original Message ----- From: "Dan McIntosh" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 03, 2003 3:01 PM Subject: Re: [Chevelle-List] Frame I've used por-15 on a multitude of things, and I love the stuff... it goes a long way, just be sure not to pour out too much at one time, as it thickens fairly fast... also, do not dip the brush directly into the container... it will contaminate the rest of the por-15 and render it useless... you will be amazed how far a quart will go if used properly... just remember... it is not UV protective, so if you use it where sunlight will find its way, make sure to topcoat it with some Chassis black... what condition is your frame in currently?/ Dan McIntosh Bagged 64 Impala SS http://www.alloldchevy.com ----- Original Message ----- From: RMilkiewicz To: Chevelle List Sent: Tuesday, June 03, 2003 12:02 PM Subject: [Chevelle-List] Frame I'm about ready to paint my frame. Has anyone used POR15? Did you like it? How many quarts did it take to paint it? Any other suggestions? Thanks Rich ACES # 05066 ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
