John, You said you also sell Dynamat. How much does it run for the various types? I'm thinking about coating my floor with the heat reflective stuff, and maybe the wheel wells, roof, doors, and trunk with the standard sound stuff, depending on when the budget runs out. I know it can really add up quickly, so I may just stop at some point. But the interior seems like the best place to start for both heat rejection and sound reduction. Any idea on the square feet required?
Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFGs '67 Chevelle | ex-SS396 | 355/700R4 | '79 F-Body Brakes > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of John Nasta > Sent: Wednesday, August 06, 2003 9:16 AM > To: [EMAIL PROTECTED] > Subject: RE: [Chevelle-list] Sound Deadener > > > The tar stuff is cheap. About $35 for a pre-cut set. > > John Nasta > Old Car Network > http://oldcarnetwork.com > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Zieg72 > Sent: Wednesday, August 06, 2003 12:11 PM > To: [EMAIL PROTECTED] > Subject: Re: [Chevelle-list] Sound Deadener > > What I have found that works good and not real expensive as opposed to > aftermarket houses is ice dam felt for roofing. It is thick and self > sticking, and your local Home Depot will carry it. _______________________________________________ Chevelle-list mailing list [EMAIL PROTECTED] http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net
