You can buy one in most auto parts stores and the cam will have correct-size grooves for various diameter tubes.
John Nasta -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Krister Meister Sent: Tuesday, August 19, 2003 2:10 PM To: [EMAIL PROTECTED] Subject: RE: [Chevelle-list] RE: Fuel Lines Tubing bender definitely. I would recommend the spring tip - which will allow you to slide it over the end of the tubing and make compound curves without kinking. These spring benders are used typically for bending copper tubing for plumbing, but will also work on brake / fuel lines. They can be found in the plumbing section of most hardware stores / building centers. Krister Meister Bloomingdale, IL "66 SS #'s You really should buy a tubing bender. They are cheap. Wasn't GENTLE BENDS the name of a movie I saw when I was a kid? John Nasta -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Tuesday, August 19, 2003 1:20 PM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-list] RE: Fuel Lines Tony You may have to gently bend the fuel/brake lines to get them to fit. I believe most of the larger line manufactures send them to you rolled up. GENTLE BENDS are the key words. Hope this helps Bill C _______________________________________________ Chevelle-list mailing list [EMAIL PROTECTED] http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net _______________________________________________ Chevelle-list mailing list [EMAIL PROTECTED] http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net
