Re: [Chevelle-list] 66 E-brake cable question

[George Spatta]

Thanks for the tip Wayne. I hadn't thought about using a hose clamp. I'll give that a try!   George [EMAIL PROTECTED] ----- Original Message ----- From: Wayne To: The Chevelle Mailing List Sent: Wednesday, October 01, 2003 8:02 PM Subject: Re: [Chevelle-list] 66 E-brake cable question Some come out with the plier  channel lock way otheres are a real PITA Those  I  put a 1/4 hose clap around the finger/Fluted sleave  little back of the backing plate.. spray some WD-40 at it and  work it lose then through till the clamp bottoms out..  Remove the clamp and finish removing it.. IF  Iam trashing the cable I use a BOLT cutter and lop'em off   Wayne ACES # 1556 TC # 186 ----- Original Message ----- From: George Spatta To: [EMAIL PROTECTED] Sent: Wednesday, October 01, 2003 4:58 PM Subject: [Chevelle-list] 66 E-brake cable question Hey guys,   What is the proper way to compress those fingers on the ends of the emergency brake cable? It looks like if they are all squeezed together than the cable will come out of the backing plate/floor. I tried to do this with a pair of pliers but wasn't getting anywhere.   Thanks!   George [EMAIL PROTECTED] TC # 1921 ACES # 5880