Thanks Bill!! -Graham.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Lessenberry Sent: Sunday, November 30, 2003 6:47 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Another wiring question > >Since there is no tranny support to keep the motor's oil pan from >sitting on the cross frame, I was going to put a few blocks of wood to >keep it more level. Unless the wood is secured, it'll probably shake out & fall over. >Here is what I know: > The battery cable goes to the big terminal on the starter. > There are two connections on the starter. The S terminal is what engages the solenoid to engage the starter-the other is 12v in start to the coil. > The distributor (Mallory HEI) needs hookup. If it's HEI, then all you need is 12v to the BAT (or +) terminal --make it switched so you can turn the motor off. >So, with the above, > Does the distributor(+) get hooked up to the smaller terminal >on the starter? Nope > The two ends of the push button starter switch gets hooked to >the two terminals on the starter? Hook one end to the battery + and one end to the S terminal > > Do I need the alternator hooked up for a few minute run? Nope BL
