RE: [Chevelle-list] narrowing a 12 bolt

[Tigergutt]

Title: Message

Now that you are at you files Dale, would you be so kind to tell me the drum to drum with of a1968 rear and also hub to hub with up front ??       Med Vennlig Hilsen/Kind Regards/Cordiali Saluti   Andr� Broe Jensen   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dale McIntosh Sent: 6. desember 2003 18:45 To: 'The Chevelle Mailing List' Subject: RE: [Chevelle-list] narrowing a 12 bolt   68-72 is the wider one.  Measurements vary as sources measure from different points but 1- to 1 1/2-inch per side is the accepted norm. Dale McIntosh TC Gold #92/ACES #1709/NECOA #41 67SS/67 Elky Dale’s Place – My 67 SS and 67 El Camino ChevelleStuff – Decoding info on 64-72 Chevelles Team 67 – 1967 Chevelle/El Camino Specific Midwest Chevelles – Midwest Chevelle Show Information -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tigergutt Sent: Saturday, December 06, 2003 3:58 AM To: 'The Chevelle Mailing List' Subject: RE: [Chevelle-list] narrowing a 12 bolt Mike,   Isn’t so that a 68/72 rear is two inches shorter than the 64/67 ones.... or was it two inches wider ???? Sorry but I cant remember,     Med Vennlig Hilsen/Kind Regards/Cordiali Saluti   Andr� Broe Jensen   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Holleman Sent: 6. desember 2003 02:45 To: [EMAIL PROTECTED] Subject: [Chevelle-list] narrowing a 12 bolt   Anybody know of a good source of info on narrowing a stock 12 bolt? I need to bring  my 12 bolt down about two inches total. If someone has access to a good article or report on this process I would appreciate the help. The 12 bolt is for my 65 Elky and I'm trying to fit some 17 x 10 inch wheels with 5 and 1/2 inches of backspacing. I would also like to eliminate the c clips and add rear disc in the process. Any guidance will be appreciated. Mike Holleman