John , not 100% sure about 68 to 72 model years but the 64 to 67 have these line up pin holes below the cowl and at the rear coal spring perch pads... IMHO being off a 1/4 " can be significant in lining up the panels. example only being off 1/4 from the rear to the front , then continue that off setting line to the front end , the radiator frame mounts. are now off 3/8 of an inch
----- Original Message ----- From: "John Usher" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, December 15, 2003 3:13 PM Subject: [Chevelle-list] Align body with frame I am placing the body back on the frame and wondered how accurate I need to be. Currently, using the holes at the front (below the cowl), the body is shifted back about 1/4" from being perfectly over the holes. I can insert all the hardware to attach the frame, but was wondering is this 1/4" will be a problem when I go to install all the body panels for the front-end (fenders, hood, etc.) Will I have a problem attaching the front end if I don't fix this offset? Thanks. John 69 Chevelle SS Mississippi
