A 283-2 isn't going to take much fuel to get it running. Probably the smallest 4-bbl from Edelbrock would be their 500cfm unit (#1404). Another choice would be a Holley 390cfm (#0-8007) for a small engine (http://www.holley.com/HiOctn/ProdLine/Products/FMS/FMSC/0-8007.html). An Edelbrock Performer EPS (#2701) intake would make a good choice for a mild 283 (idle - 5500).
Dale I've stopped 1,541 spam messages. You can too! One month FREE spam protection at http://www.cloudmark.com/spamnetsig/ > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > John C. Butler > Sent: Tuesday, February 24, 2004 3:40 PM > To: 'The Chevelle Mailing List' > Subject: [Chevelle-list] Malibu Carb question > > Does anyone know where I could find information on the > carburetor size that was on the 66 Malibu, 2 barrel, 283 > motor. I need to replace mine and was thinking about getting > a edelbrock 4 barrel manifold and carb but not sure of the > cfm to get. Any hints or suggestion would be great. > > > > John > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > Pelle Andersson > Sent: Tuesday, February 24, 2004 10:35 AM > To: Chevelle Mailing List > Subject: [Chevelle-list] Off subj? Q: Impala towing hook? > > > A friend of mine is wondering which towing hooks that will > fit a -75 Impala B-bod? > > Best regards > Pelle Andersson > ------------------------------------------------------------------ > http://members.chello.se/gearheads/ > > > > > > >
