thanks for the help Don 65 conv.
> [Original Message] > From: [EMAIL PROTECTED] <[EMAIL PROTECTED]> > To: Chevelle-list <[EMAIL PROTECTED]> > Date: 5/11/2004 6:35:31 AM > Subject: RE: [Chevelle-list] fuel gauge > > Dave, > > I think you need a new sender (or gauge). > If it was to change from 90 to 240 straight you could just put a 150ohm resistor inline and be done. > But since you want a scale (std chevy being 0 to 90 ohms) that would make it go from 150-240ohms instead. > I dont know how much the bottom scale on that 240ohm gauge is but its either 0 or like 30 or so if i remember well. > The sweep of the gauge would therefore be from approx. half tank (when tank is empty) to full tank (when tank is full) > > Ciao > Andr� > > > i > ohms = resistance. You should be able to add a resistor inline, I would > > think. I have no idea which one or what size, though. > > > > > -Dave > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of Don CHESSER > > > Sent: Monday, May 10, 2004 6:39 PM > > > To: [EMAIL PROTECTED] > > > Subject: [Chevelle-list] fuel gauge > > > > > > > > > > could some one tell me how to change ny fuel sending unit ohms from 90 to > > > 240 thanks if not possible please tell me . thanks > > > > > > > > > > > > > > > > > > > > > > >
