Probably so, as the mounting bracket is for the OEM dash. About $440 from Summit for the column and bracket. Yuppers, comes with the directional and hazard switches, and the levers for them and the tilt. According to the sales guy I spoke to, the horn is there along with all the wiring. Since I have a new/update wiring harness, I don't need their flasher kit and plugs in with the 4" connector. I update my website when it done with the steps taken.
-Graham Quoting Ed Riggins <[EMAIL PROTECTED]>: > I think the mounting bracket is the same for the non-tilt. Does it come > complete with directional switch and levers for the switch and tilt? Stuff > to make the horn work? I guess it's for a floor shift? Ed > > > > From: Graham Wooden <[EMAIL PROTECTED]> > > Reply-To: The Chevelle Mailing List <[EMAIL PROTECTED]> > > Date: Tue, 24 Aug 2004 13:34:34 -0400 > > To: The Chevelle Mailing List <[EMAIL PROTECTED]> > > Subject: Re: [Chevelle-list] Flaming River steering columns > > > > Hey Ed, > > > > Um, maybe they went to a new product offering ... check out "FR20006-48" > at > > http://www.flamingriver.com/OEM-tilt.htm . > > > > I was able to get a better idea on the installation process from a sales > > engineer over there. Should be pretty straight forward. Hopefully :^) > > > > -Graham > > > > > > Quoting Ed Riggins <[EMAIL PROTECTED]>: > > > >> I thought the tilt for '67 was a one year only fit. First year > collapsible > >> with the flasher unit built in and a wider base to fit the dash. The > later > >> units had the key in the column and different dimensions didn't they? > Ed > >> > >> > >>> From: Graham Wooden <[EMAIL PROTECTED]> > >>> Reply-To: The Chevelle Mailing List <[EMAIL PROTECTED]> > >>> Date: Tue, 24 Aug 2004 09:43:57 -0400 > >>> To: The Chevelle Mailing List <[EMAIL PROTECTED]> > >>> Subject: [Chevelle-list] Flaming River steering columns > >>> > >>> Hi, > >>> > >>> Does anyone have experience of installing and using their steering > >> columns > >>> before? > >>> I picked up the basic tilt one from them, #FLA-FR20006-48, for my 67SS > - > >> but > >>> is there any "gotcha" parts that I should consider (or need) while > >> changing > >>> this out? I believe it's pretty much drop in as this one is made for > 67-72 > >> A > >>> bodys ... > >>> > >>> Thanks in advance, > >>> > >>> -Graham > >>> > >>> 67 Chevelle SS > >>> http://wwww.projectchevelle.com/ > >>> > >>> > >>> > > > > > > > > > > -- Graham Wooden, RHCE [EMAIL PROTECTED]
