Easy way to check cable condition is with the old or new cable hooked to
the trans, routed into the car correctly, unhooked to the speedo (have it
hanging down so you can see or feel the end) - take it for a slow ride
around the neighborhood and see if the inner cable rotates
Krister
[EMAIL PROTECTED]
Sent by: To:
[email protected]
[EMAIL PROTECTED] cc:
evelles.net Fax to:
Subject: Re:
[Chevelle-list] Help: Trans/Speedo Help Needed.
06/06/2005 10:31 AM
Please respond to The
Chevelle Mailing List
I have a 64 El Camino with a Muncie 4 speed, M 21.�� Just had it rebuilt
at Cottsman.�� Was recommended to me.�� After getting the car back from
rebuilt transmission, my speedo does not work.
I replaced the cable, and still nothing.�� I see the old cable worked ok,
once I removed it.
With my cable it is a screw on cap at both ends, so not hard to replace.
Just can not figure why the speedo does not work after having the
transmission rebuilt.� yes it did work before the transmission work.
Will be talking to them today.
So I too need help with the Transmission and Speedo cable too.
Thank you� All,
Kelly
