My 91 Chevy 1/2 ton truck had a 350 with serpentine set-up. Since GM made hundreds of thousands of these trucks,maybe you can pick up everything you need in a local salvage yard. You shouldn't have to spend over $100-200 to get what you need. Late 80's-early 90's Camaros and Firebirds with V8 have these same set-ups. Clint Hooper H&H Custom,owner 1969 El Camino ProTourer 2001 H-D FLHR custom bagger http://dalesplace.com/misc/friends/clint/clint_hooper.htm ----- Original Message ----- From: "mike f" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" <[email protected]> Sent: Monday, October 10, 2005 12:48 PM Subject: [Chevelle-list] Advise on Stroker pulley setup.
> Gents and ladies. I need some advise. The SB 383 has a > large Harmonic balancer cause it's a 400ci crank assy. > Now it seems to me the short water pump is not an > option and I am ok with that. I had hoped to remove > the stuff off the 283 for the short term. However, I > just don't want to spend 800$ right now to get the > serpintine system. > http://www.gmpartsdirect.com/results.cfm?singlepart=1&partnumber=12497698 > > I need some advise on what I what and perhaps where I > can get enough pulley/ bracket parts to fire this > motor up and get it to a point where I can get the > Windshield installed. I can spend the money but it > would be a lot better if I spent the 800 toward a > drive shaft, control arms and tires and such. > > thanks in advance. > mike > > > > > > __________________________________ > Yahoo! Music Unlimited > Access over 1 million songs. Try it free. > http://music.yahoo.com/unlimited/ >
