I’m planning to use the same product, Lizard Skin. I talked to the owner and a friend that does custom work on cars. He likes it over Dynamat. He said they had a 25 degree drop in temp using it inside on the roof.

 

If you use it before I do, tell me how it turns out!!

 

 

  Dan Mascheck

  Wharton, TX

 


From: Gene Smith [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 19, 2005 10:02 AM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Floor paint?

 

Hi,

 I am planning on using Lizard Skin over Por-15. The lizard skin is a heat and sound barrier coating popular with street rod builders. Only has to be .040 thick. 

 

 

Gene

----- Original Message -----

Sent: Wednesday, October 19, 2005 7:32 AM

Subject: Re: [Chevelle-list] Floor paint?

 

Pelle, I just tried something different with good results. I'm restoring a 64 Impala SS for a local guy. He asked why not use bedliner on the floor pans. We did and it turned out excellent. It can be sprayed, rolled or brushed. It's very tough and seals the metal. Might be worth a look.

Mike 

----- Original Message -----

Sent: Tuesday, October 18, 2005 10:26 PM

Subject: Re: [Chevelle-list] Floor paint?

 

  I'd clean off as much rust & scale as possible.  Paint with POR 15 , Extend, Rust Bullet or some other similar product (what is available in Europe???).   Then I'd spray with rubberized undercoating. 

On 10/18/05, Pelle Andersson <[EMAIL PROTECTED]> wrote:

I'm going to remove the (by someone) homemade carpet & replace it

with a new one! I'm going to remove all the rust & old tar paper and I

wonder if I can paint the floor with that rubber:ish stuff sometimes used

to protect cars from stone damage? I want to reduce noise & prevent rust!

What would you guys do?

 

 

Best regards
Pelle
______________________________
Chevelle gearheads
http://hem.bredband.net/chevellegearheads/




--
Rick Schaefer
72 TPI El Camino


No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.12.1/136 - Release Date: 10/15/2005

Reply via email to