Re: [Chevelle-list] Looking for auto paint sites

[Bob n Cheri]

Thanks for the help.   I have some PPG Delstar enamel that I want to top coat with some PPG Concept 2020 clear. The products are old but look good and have been in tightly sealed containers.   Also want to know if these can be applied over existing enamel without additional prep (primer sealer). Have concerns about adhesion or lifting. Am just going to sand with 400 grit paper. I would like to use up what I have instead of spending big bucks for paint for  a little project.     Used to be as long as you painted enamel over lacquer it worked ok but now have heard that with some of the new basecoat clearcoat systems anything can happen if you don’t have the proper primer sealer.   That’s why I was looking for product info on various topcoats for compatibility.   In this particular instance I'm still using enamel over enamel.   I did have one pint of custom mixed Dupont basecoat mixed up and it cost me nearly $40. Ouch.   Thanks, Bob Belz   ----- Original Message ----- From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Tuesday, November 08, 2005 10:06 PM Subject: Re: [Chevelle-list] Looking for auto paint sites well im not sure of  any sites but i am experianced with ppg esp. and somewhat of dupont if you give me product numbers (ex. dp 401) i may be able to find the product sheets from my suplier  and can copy and send or you may be able to take the product numbers your self to a local autoparts/paint supplier and get them your self