I wish I would have video'd mine as well. I could show the dyno magnetic pickup being sucked through the blower and out the exhaust at 6500rpm.....
Good outing Larry... Walt http://www.personal.kent.edu/~wbainey/CHEVELLE.htm ----- Original Message ----- From: Matthew Post <[EMAIL PROTECTED]> Date: Wednesday, December 21, 2005 1:12 pm Subject: Re: [Chevelle-list] What to do with my 396?? > Nice Larry! The video is awesome. Wish I had done that at my > dyno run. > > At 09:49 AM 12/21/2005, Larry Shouse wrote: > >I got: > > > >442hp @ 6000rpm > >467fp @ 4250rpm > > > >I hope to get better numbers after it's in the car and we can > work with > >the carburetor some. The guy running the dyno took my carb off > and put a > >custom job that was on the shelf on my engine and picked up 17 > more horses > >without any tweaking (469hp). I just can't afford custom stuff > like that > >though. > > > >BTW, I forgot to mention I'm running L78 heads. Although I did > get the > >heads rebuilt, I did not have any porting or polishing done. > > > >Larry > >----- Original Message ----- > >From: <mailto:[EMAIL PROTECTED]>Matthew Post > >To: <mailto:[email protected]>The Chevelle Mailing List > >Sent: Wednesday, December 21, 2005 11:16 AM > >Subject: Re: [Chevelle-list] What to do with my 396?? > > > >Hey Larry, what were your dyno numbers again? > > > >At 05:29 AM 12/21/2005, Larry Shouse wrote: > >>Tom, > >> > >>Here's what went into my 396 build: > >> > >>TRW-L2242F30 SPEED-PRO POWER FORGED PISTONS > >>MOLLY RINGS _ CANT READ P/N > >>COMP CAMS CCA-11-430-8 MAGNUM RETRO-FIT HYD. ROLLER CAMSHAFT > .566 > >>LIFT/280 DURATION > >>COMP CAMS CCA-1320-16 PRO MAGNUM ROLLER ROCKERS > >>COMP CAMS CCA-854-16 HIGH ENERGY HYDRALIC ROLLER LIFTERS > >>COMP CAMS CCA-924-16 VALVE SPRINGS - DUAL > >>COMP CAMS CCA-7110 BILLET TIMING SET - DOUBLE ROLLER > >>COMP CAMS CCA-7991-1 HI-TECH 3/8 IN INTAKE PUSHRODS > >>COMP CAMS CCA-8900-1 HI-TECH 3/8 IN EXHAUST PUSHRODS > >> > >>I also used... > >>All new ARP fasteners > >>870 Holley Street Avenger carb > >>Edlebrock Performer RPM intake > >>Mallory Comp9000 distributor > >>Misc other parts like oil pump, harmonic balancer, etc. > >> > >>Including the cost of machine work on my block and heads, > balancing, and > >>a used forged crank and the work on it, I spent around $5000. I > assembled > >>the engine myself. > >> > >>To hear the lope, click here: > >> > >><http://www.fuglybrothers.com/videos/dyno- > setup.wmv>www.fuglybrothers.com/videos/dyno-setup.wmv > >> > >>Larry Shouse > >> > >> > >>----- Original Message ----- > >>From: <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] > >>To: <mailto:[email protected]>[email protected] > >>Sent: Wednesday, December 21, 2005 12:27 AM > >>Subject: Re: [Chevelle-list] What to do with my 396?? > >> > >>Thanks Clint..It seems like I spent 2500 blue printing and > balancing that > >>400..What about a roller cam? not really familiar with them, > but hear a > >>lot of talk about them..I'll keep you posted..I really want to > put the > >>396 back in there..tom >
