you can remove the wheel and hub and relocate it back on, I have done it
before, just borrow or rent a steering wheel puller.
----- Original Message -----
From: "John Nasta" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <[email protected]>
Sent: Monday, January 09, 2006 4:12 PM
Subject: [Chevelle-list] Steering wheel/column question
My steering wheel is not oriented properly. With the wheels in proper
alignment and turned straight, the steering wheel is probably about 75
degrees off (counterclockwise from where it should be). Should I...
a) Remove the steering wheel & hub and put the hub back on in a different
orientation. Is that possible or is there a keyway or spline so that the
hub
only goes on one way?
b) Take apart the rag joint and re-orient the yoke going into the steering
box. Again I don't know if that's possible for the same reasons.
I'm sure there is a straightforward way to get my steering wheel straight.
Also, does anybody know the thread size of the Flasher knob or where I can
get one such knob? It should be the same for all 69-72. Mine is broken
off.
Thanks,
John Nasta
