very cool---I've after being in auto bus. alot off stuff is interchangeable.
----- Original Message -----
From: "mike f" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <[email protected]>
Sent: Monday, February 06, 2006 11:16 AM
Subject: Re: [Chevelle-list] serpentine
Fred, Vin.
I picked up an 04 Blazer setup. However, there is one
small detail that had to be worked out. Everything
bolts up perfectly. I may have to do a bit of
"clearance" between the back of the bracket assy to
make room for the lip of the aluminum valve covers and
gaskets, but that is the minor deal. The larger issue,
however, is on the small block V-8, the water pump has
two holes on the right side. One is smaller and the
other is a large hole. Now, on the V-6 water pump, it
does not have the small hole like the V-8 pumps. I
taped and pluged the small hole. It's a done deal. It
all fit and hood closes good.
Hope someone else has actual experience with the other
truck parts, I would like to hear about it. My deal
was about 350$ rather than the 1700$ the others cost.
hope this helps.
mike
--- vin <[EMAIL PROTECTED]> wrote:
pretty sure serp. setup from v-6 s-10 blazer will
work.
----- Original Message -----
From: Fred Knoche
To: [email protected]
Sent: Sunday, February 05, 2006 9:10 PM
Subject: [Chevelle-list] serpentine
I am thinking about converting my SBC over to a
serpentine belt system. I am looking toward a stock
setup rather than an expensive aftermarket setup.
Does anyone have any experience in this area? I
notice that different years use different brackets.
Does anyone know the best year setup to use?
Any help on this would be great.
Thanks,
Fred
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
